HOW TO FLASH FIRMWARE IN MICROMAX KNIGHT 2.

Today, I'm gonna show you how to flash firmware in your Knight 2. Actually we need to flash firmware in our phones because sometimes the phone is misbehaving or hanging or freezing sometimes. So for that we can flash firmware to get directly a new whole system without any hanging problems. Or if you are a guy who keep changing it's ROM then you also better understood why actually firmware needed,Right?

Now come to the point.

This whole thing is 200% safe and done many times by me and never caused any problem. But still I'm gonna say that DO IT AT YOUR OWN RISK. I WILL BE NOT RESPONSIBLE FOR ANY THING HAPPENS TO YOUR DEVICE.

REQUIRMENTS:

1. A PC & knight 2 device.
2. Firmware file. Download link is given below.
3. USB-Data Cable
4. Any zip extracter for extracting the firmware zip.
5. And a normal working mind. LOL

STEPS FOR FLASHING IT:

1. First download the file and extract it using winrar or 7zip.
2. Now power off your devices.
3. Now press power+volume down buttons at same time and hold it for few seconds until mmx logo appers on screen.(If your device is hard bricked then directly boot that into fastboot mode because you can't power it off,right.)
4. Now leave the buttons and connect your phone to the PC using USB data cable.
5. Now go to folder which you get from the firmware zip.
6. Now you will se a file named as "8939_fastboot_all_images.bat" , Just double click on it and wait until the process is done.
7. After the process is complete your phone will reboot automatically.

You flashed your firmware now enjoy.

Thanks for reading this Post.

DOWNLOAD

Micromax_E471_V1_16.05.15


Follow me on:

Facebook     Instagram     Telegram

Credits:
Me(Raush)
Xdafirmware.